Industrial Utility Efficiency

Industries

The new solution also saves close to 90 percent of the annual maintenance costs. The side channel blowers required intensive repairs and were therefore a source of high costs. MINK MV claw vacuum pumps provide completely dry compression of intake air and thus work without operating fluids such as oil or water. This makes the vacuum pumps virtually maintenance-free. 

Soft Drink Bottler Saves Energy With Blowers

A leading soft drink bottling manufacturer’s compressed air needs were threatening to exceed its Michigan plant’s compressed air capacity. Faced with the cost of buying a new compressor, the soft drink bottling manufacturer re-assessed their compressed air use to identify compressor and energy savings opportunities. In the audit, the soft drink bottling manufacturer identified the use of compressed air in a gap transfer as a source of compressed air and energy inefficiency.

An Introduction to WAGD System Implementations

This article will examine in detail four of the five acceptable WAGD implementations under NFPA 99, along with some alternative ways they may be implemented. This article will not deal with passive implementations.

Inappropriate-Use Assessment Saves 1,881 scfm

This factory currently spends \$735,757 annually on the electricity required to operate the compressed air system at its plant. The group of projects recommended in the system assessment will reduce these energy costs by an estimated \$364,211 (49% of current use). Estimated costs for completing the recommended projects total \$435,800. This figure represents a simple payback period of 14.4 months.

Tubular Membranes Handle Oily Wastewater at Metaldyne

Finding the most effective, reliable and economical method for separating and concentrating die lubricant is no easy task for die casting plants – and the situation at the Metaldyne aluminum die casting plant in Twinsburg, Ohio was no different. 

Blowers Save Energy at Aluminum Mill

Relatively few people realize that for a variety of industrial manufacturing applications, from air knife drying to simple blow-off nozzles, the use of high pressure compressed air that bleeds into the atmosphere represents a significant waste of energy.  

Food

Vacuum and protective gas both reduce the activity of oxygen-dependent microorganisms inside the

Wastewater

When a facility plans for a wastewater treatment plants, they typically design based on population

Containers

Many manufacturing processes are like offensive linemen. When everything is running smoothly,

Auto

The 2023 International Powder and Bulk Solids Conference and Exhibition took place April 25-27,

Plastics

The basic function of vacuum degassing is to remove the vaporized gas and moisture from the

Transit

The IWF 2022 International Woodworking Fair was held August 23-26 at the Georgia World Congress

Pharmaceutical

Ever since it was commissioned in 1974, the Echallens wastewater treatment plant in the Swiss

Auto

The 2023 International Powder and Bulk Solids Conference and Exhibition took place April 25-27,

Energy

Blower & Vacuum Best Practices interviewed Mr. Sid Van der Meer and Mr. Terry Nickel from