Industrial Utility Efficiency

Aeration Blowers

Many designers and operators believe that multistage centrifugal blowers are not suitable for variable speed control. They also feel that multistage centrifugal blowers are an inefficient option for wastewater aeration. Implementing VFD control of their aeration blowers allowed the plant to improve energy efficiency. The reduction in energy expense paid for the system upgrade in less than two years.

How to Calculate Aeration Blower Energy Costs

Aeration blower upgrades may be part of a total plant upgrade and minimizing energy consumption is a critical consideration. Blower replacements are also a common Energy Conservation Measure (ECM) in cost-reduction programs.

A Review of ASME PTC 13 Wire-to-Air Performance Test Code for Blower Systems

Finally, a test code has been created that will provide accurate performance comparisons for both positive displacement and dynamic (centrifugal) blowers. ASME PTC 13 provides procedures for determining the required total operating electrical power of a packaged blower system, termed the “wire-to-air” performance. Here’s a review of PTC 13 and considerations related to this important standard.

The Basics of Aeration Control Valves - Part 2

In the first of this two-part series on the basics of aeration control valves we examined valve fundamentals and basic equations for analysis. Here, we look at interactions between valves and discuss new flow control technologies.

Progress Continues on ASME PTC 13, Blowers

In 2010, the American Society of Mechanical Engineers (ASME) established the PTC 13 Committee to establish a power test code for all blower technologies. Blower & Vacuum Best Practices Magazine interviewed Committee Chair Jacque Shultz, HRO-Turbo Product Technical Leader, Howden North America, Inc., for an update on the new code.

The Basics of Aeration Control Valves - Part 1

Sizing, selection, and adjusting control valves often causes confusion for process and control system designers. Improper valve application can cause operating problems for plant staff and waste blower power. Basing the airflow control system design on fundamental principles will improve valve and control system performance.

Efficiency: An Invaluable Parameter for Vetting Aeration Blowers

Efficiency compares the inputs used by a system to the outputs produced. It is a commonly used concept, but one which is prone to a great deal of misuse in many industries. This article provides insight into the parameter known as “efficiency,” how it’s calculated, and importantly, it’s uses and limitations in predicting blower energy consumption and comparing alternate system designs.

Sni-A-Bar Wastewater Plant Saves $42,000 Annually in Energy with New Aeration Blowers

After auditing and field-testing, the Sni-A-Bar Municipal Wastewater Plant in Blue Springs, Missouri, partnered with Inovair to replace 4 fixed-speed rotary lobe blowers on its aeration system with 4 Variable Frequency Drive (VFD), integrally geared centrifugal blowers. The new blowers, along with improvements in blower controls, reduces annual energy use by 442,664 kWh and peak electrical demand by 48.76 kW, which translates to an annual energy reduction of 37 percent and anticipated savings of \$42,000 per year. Additionally, a rebate of \$45,799 from the local utility resulted in a payback of less than six years.

Pay Close Attention to Turndown to Achieve Blower System Optimization

Turndown designates the operating range of an aeration blower or a blower system – and it can often be the most important factor in determining the ability of a system to match process demand. It is also critical to the system’s energy optimization. Unfortunately, in designing blower systems and controls turndown is not always given the attention that its importance merits. Here’s a look at the critical nature of turndown in wastewater treatment plants and recommendations for ensuring adequate turndown when utilizing Positive Displacement (PD) and centrifugal blowers.

Three Blower Technologies Help Pennsylvania Wastewater Plant Meet Wide Range of Operating Conditions

Originally built in 1958, the CMA wastewater treatment plant serves 14,000 residents, as well as businesses, in Clearfield Borough and surrounding portions of Lawrence Township, Clearfield County, PA. From the start, the plant consistently met water quality and effluent parameters as specified in its National Pollutant Discharge Elimination System (NPDES) permit throughout. However, new mandates in 2010 and the need for ongoing improvements drove the need for plant upgrades.