Industrial Utility Efficiency

Technology

Industrial ceramics have been produced in Hermsdorf, near Jena, since 1890. In the past, high-voltage insulators; now, ceramic honeycomb bodies for heat exchangers, ventilation and emission control systems. They have always kept up with the times, developing innovative materials, products and state-of-the-art production processes to do so.

New Vacuum Solution Ensures Safe & Sustainable Tires at Continental

The new solution also saves close to 90 percent of the annual maintenance costs. The side channel blowers required intensive repairs and were therefore a source of high costs. MINK MV claw vacuum pumps provide completely dry compression of intake air and thus work without operating fluids such as oil or water. This makes the vacuum pumps virtually maintenance-free. 

Vacuum Upgrades Improve Operations at SupremeX

SupremeX, a Canadian based envelope and packaging manufacturer, with 11 facilities across six provinces, as well as five facilities in the United States, recently upgraded the vacuum system in their Winnipeg based plant. This article discusses the system before and after the changes, and the significant energy savings, plus improved system reliability that resulted. The company also captured a significant utility incentive to help with the cost of a new cutting-edge variable speed vacuum pump.

Extrapolating PD Blower Performance

Positive Displacement (PD) blowers have been a workhorse for wastewater treatment for over 150 years. They are robust and simple to operate. They are often the first choice for small facilities and for applications with wide variations in discharge pressure. When combined with variable frequency drives (VFDs) they provide operational flexibility in flowrate across a wide range of discharge pressures.

Get the Most Out of Centrifugal Blower Control Upgrades

Single-stage centrifugal blowers are a proven technology that have been around for many years and will probably be here for many years to come. A well maintained machine can last for decades and will likely outlast its original control system. Even if the control system is still in good working order the components might already be end of life and hard to replace if any of them fail. If you are thinking about modernizing the hardware (PLC / HMI / Instruments) this is also a great opportunity to make the system a little smarter and user friendly. 

Measuring Blower Airflow Rates with Calibrated Ammeters

One definition of “calibrate” is “to determine, rectify, or mark the graduations of something”. An ammeter is an instrument for measuring electric current. Therefore the simple definition of a calibrated ammeter is a current measuring device marked with units of measure, presumably amperes. In the blower industry, however, the term has developed a specific meaning. A calibrated ammeter is an instrument that measures a blower motor’s current draw and converts the measurement to a display of blower airflow rate. 
 

Show Report: Vacuum Technology at 2022 AISTech

The 2022 AISTech Conference and Exposition was held May 16-18 at the David L. Lawrence Convention Center in Pittsburgh, Pennsylvania. It was the conference and exposition’s most successful year yet with more than 8,000 attendees. The event featured 300+ technical presentations and 500+ exhibitors, featuring the latest technologies in iron- and steelmaking from all over the world. AISTech 2022 also gave away a brand new, fully loaded, 2022 Chevy Silverado Truck to one lucky attendee. Both Blower & Vacuum Best Practices and Compressed Air Best Practices Magazines were pleased to be in the literature bins. 

Vacuum Solutions for Plastic Recycling

More than 300 million tons of plastic is produced every year, and much of it ends up causing environmental problems. In response to these challenges, there are widespread global efforts to increase recycling capacity and innovate for more efficient and effective recycling solutions. Vacuum plays a critical role in achieving these improvements.

Specification Considerations for ASME PTC 13

The American Society of Mechanical Engineers (ASME) released their Wire-to-Air Performance Test Code for Blower Systems in 2018. Designated PTC 13-2018, it has rapidly become a standard for inclusion in blower specifications.

Continuing Education at the Best Practices 2021 EXPO & Conference

The EXPO & Conference focuses on “Optimizing On-site Utilities Powering Automation.” Experts from all over the world convened to discuss compressed air, pneumatics, motors and drives, vacuum, aeration blower and chiller/cooling and water treatment systems.

Held November 2-4, 2021, this 3rd installment of the event continued to provide continuing education, certification and networking opportunities to equipment sales engineers, engineering firm and manufacturing plant personnel.

Two Vacuum System Optimization Case Studies from Europe

By using state-of-the-art vacuum technology for degassing mineral water, it has been possible to save an average of 3,000 cubic meters of water per filling plant per year. The solution was to replace the existing liquid ring vacuum pumps with MINK claw vacuum pumps from Busch Vacuum Solutions.

Aeration Blowers

Many designers and operators believe that multistage centrifugal blowers are not suitable for

Air Knives - Nozzles

Blower & Vacuum Best Practices interviewed Republic Manufacturing VP of Sales & Marketing,

Industrial Blowers

One of the most exciting technologies impacting the ability of end-users to optimize blowers at

Measurement

Every municipality and utility is facing the reality of rising energy costs. In 2010, the Town of

Medium/High Vac

The 2022 AISTech Conference and Exposition was held May 16-18 at the David L. Lawrence Convention

Purification

In this article, we discuss both vacuum pump inlet and exhaust filtration and explore how

Rough Vac

In this article, we’ll discuss some of the uses for receiver tanks for positive pressure systems

Vac Generation