Industries

The International Production & Processing Expo (IPPE) is a collaboration of three shows - International Feed Expo, International Meat Expo and the International Poultry Expo - representing the entire chain of protein production and processing. The tradeshow focuses on bringing together leaders in the poultry, meat and feed industry from all over the world. IPPE’s global reach attracts more than 8,000 international visitors from 129 countries.

The European XFEL is a new international research facility, where 12 European countries participate. The non-profit society European XFEL GmbH is responsible for the construction and operation of the X-ray laser. DESY (Deutsches Elektronen-Synchrotron), one of the leading centers for the investigation of the structure of matter worldwide and a long-term partner of Pfeiffer Vacuum, is the main share- holder.

Meat packaging plants have long used vacuum pumps as a way to remove air and reduce the amount of oxygen in their products’ plastic packaging. Vacuum packaging extends the meat’s shelf life while protecting its flavor and exposure to outside elements, such as freezer burn and bacteria.

A centralized vacuum system with three Mink claw vacuum pumps is used in each of the two Danish plants to generate the vacuum required for clamping. Both central vacuum system units have been in operation since July 2015 when they replaced the previously used dry-running rotary vane and liquid ring vacuum pumps. The rotary vane vacuum pumps required a lot of maintenance due to wear on the vanes. In addition, this vacuum generator gave off waste-heat directly into the production room. Its loud operating noise was also extremely uncomfortable for the employees. The water level of the liquid ring vacuum pumps had to be monitored constantly, and refilled or exchanged if the water became polluted with wood dust.

This article reviews two common pneumatic conveying system types and the importance for each operating plant to know their design and operating parameters particularly conveying air flow velocity and particle velocity profile.

The integrated process that leads to perfectly finished components begins in the plant’s new material store. “One way we’re staying at the leading edge in our market is by researching the latest innovations and choosing the best machine for each process,” Legere explains. “Our new material store, operational in June 2017, is one example. It combines a physical data base of sheet goods with a robotic arm that handles materials and presents them to a cutting machine for processing. After a few minutes, a finished part emerges. All of this occurs with zero human interaction.”

The capacity and pressure requirements of blowers in a Water Resource Recovery Facility (WRRF) are determined by the aeration system. When systems are manually controlled blowers often operate at constant flow and pressure day in, day out. When the aeration system is automatically controlled to maintain a set dissolved oxygen (DO), however, the blower’s flow and system pressure vary constantly. Understanding these variations will help designers and suppliers optimize blower performance.

In open end pipe line suspension flow, or dilute phase pneumatic conveying, proper particle velocity is critical to continuing productivity and product quality. Until recently, measurement of actual particle velocity within the pipe has not been practical outside the laboratory. The plant operating personnel depend on a much less accurate metric - estimating the conveying air velocity in the pipe and relating that to particle velocity.

The Wastewater Association of Rheinfelden-Schwörstadt operates the wastewater treatment facilities in Schwoerstadt and Rheinfelden-Herten, Germany, as well as several rainwater overflow basins. This wastewater treatment facility now satisfies the highest requirements, and with a population of about 47,000, has reached a size that also guarantees sufficient disposal capacity for future generations.

Pneumatic conveying systems are widely used in manufacturing plants and process industries. They provide a practical method of bulk-solid material transport. A surprisingly wide variety of powders and granular material can be effectively moved from one location to another within the plant. “Compared with other bulk-solid transport systems, a properly designed pneumatic conveying system affords many advantages".