When the plant’s original aeration blowers became costly to operate and newer technology offered the promise of energy-savings, Fuqua took decisive action and replaced the older blowers with high-speed turbo blowers. As a result, the plant saves ratepayers approximately $30,000 per year in energy costs and bolsters the plant’s ability to maintain uptime and achieve extremely clean effluent.
The new solution also saves close to 90 percent of the annual maintenance costs. The side channel blowers required intensive repairs and were therefore a source of high costs. MINK MV claw vacuum pumps provide completely dry compression of intake air and thus work without operating fluids such as oil or water. This makes the vacuum pumps virtually maintenance-free.
There’s a lot of vacuum going on in the woodworking industry. From treatment to routing to handling, vacuum systems help meet the demands for higher speed performance, greater precision, faster production and better quality. Vacuum technology enhances the skills and talents of operators. Woodworking facilities of all sizes and production capabilities can precisely target their vacuum requirements to deliver maximum output. Here’s an overview of the most significant woodworking vacuum applications.
One need look no further than the treatment plant’s digester project upgrade to see the value of the plant’s forward-thinking approach at work. The upgrade involved the replacement of five Positive Displacement (PD) blowers with four, high-speed Inovair integrally geared blowers for aerating the digesters. With fewer – and smaller – blowers the plant saves tens of thousands of dollars in energy costs per year. The blowers also offer flexibility to cost-effectively adapt to the need for increased water treatment in the future.
KC Water encompasses six wastewater plants and 43 flood and sanitary stations. There are 15 flood stations along the Missouri River that keep Kansas City dry. Then we have 1,350 acres of land for biosolids application. Industrial pre-treatment is the responsibility of the Regulatory Compliance Division. We all work closely together.
A long-held practice in the plastics industry is the use of high-speed, dilute-phase pneumatic conveying to deliver plastic resins to plant processes even if those same materials are the kind that can create problems ranging from excessive dust to damaged resins and more. All the while, slower-speed conveyance is normally unthinkable given production goals and the potential for plugged conveyor lines.
Pneumatic conveying applications are critical to many facilities – when you can’t move material you can’t make or sell your product. Because of a historical lack of availability of specialized rental blowers and air compressors for pneumatic conveying, plants often either accepted the production outage or rented a more readily available two-stage, oil-free rotary screw air compressor designed for 90 to 150 psig plant air service that is very inefficient at the reduced pressures needed for pneumatic conveying.
Aeration blower upgrades may be part of a total plant upgrade and minimizing energy consumption is a critical consideration. Blower replacements are also a common Energy Conservation Measure (ECM) in cost-reduction programs.
Julie Gass, P.E., is a Lead Mechanical Process Engineer at Black & Veatch and an industry veteran with extensive experience in mechanical equipment in wastewater treatment plants. She also served on the American Society of Mechanical Engineers (ASME) Committee responsible for ASME PTC 13, Wire-to-Air Performance Test Code for Blower Systems, which is the performance test code published in October 2019 for all blower technologies. Blower & Vacuum Best Practices Magazine interviewed Gass to gain her views on aeration blowers, PTC 13, and the firm’s rigorous specification process to ensure treatment plants get the blower best suited for their application.
The right vacuum solution not only ensures product quality in meat processing operations; it also helps companies achieve important sustainability goals. Such is the case at two leading meat processing companies in Germany, both of whom added Busch Vacuum Pumps and Systems solutions to their operations and saved energy and more as a result.
Vacuum can be used in many ways for the meat processing and packaging industry. From mixing ingredients to evisceration (removing organs, excess fat, bones, etc.), to the washing/preparation of the meats or even in the packaging of the meat itself, vacuum is critical to the industry.